Organoiodine compounds are organic compounds that contain one or more carbon–iodine bonds. They occur widely in organic chemistry, but are relatively rare in nature. The thyroxine hormones are organoiodine compounds that are required for health and the reason for government-mandated iodization of salt.
Almost all organoiodine compounds feature iodide connected to one carbon center. These are usually classified as derivatives of I-. Some organoiodine compounds feature iodine in higher oxidation states.1
The C–I bond is the weakest of the carbon–halogen bonds. These bond strengths correlate with the electronegativity of the halogen, decreasing in the order F > Cl > Br > I. This periodic order also follows the atomic radius of halogens and the length of the carbon-halogen bond. For example, in the molecules represented by CH3X, where X is a halide, the carbon-X bonds have strengths, or bond dissociation energies, of 115, 83.7, 72.1, and 57.6 kcal/mol for X = fluoride, chloride, bromide, and iodide, respectively.2 Of the halides, iodide usually is the best leaving group. Because of the weakness of the C-I bond, samples of organoiodine compounds are often yellow due to an impurity of I2.
A noteworthy aspect of organoiodine compounds is their high density, which arises from the high atomic weight of iodine. For example, one millilitre of methylene iodide weighs 3.325 g.
Few organoiodine compounds are important industrially, at least in terms of large scale production. Iodide containing intermediates are common in organic synthesis, because of the easy formation and cleavage of the C–I bond. Industrially significant organoiodine compounds, often used as disinfectants or pesticides, are iodoform (CHI3), methylene iodide (CH2I2), and methyl iodide (CH3I).3 Although methyl iodide is not an industrially important product, it is an important intermediate, being a transiently generated intermediate in the industrial production of acetic acid and acetic anhydride.
Polyiodoorganic compounds are sometimes employed as X-ray contrast agents, in fluoroscopy, a type of medical imaging. This application exploits the X-ray absorbing ability of the heavy iodine nucleus. A variety of agents are available commercially, many are derivatives of 1,3,5-triiodobenzene and contain about 50% by weight iodine. For most applications, the agent must be highly soluble in water and, of course, non-toxic and readily excreted. A representative reagent is Ioversol (Figure to right),4 which has water-solubilizing diol substituents. Typical applications include urography and angiography.
In terms of human health, the most important organoiodine compounds are the two thyroid hormones thyroxine ("T4") and triiodothyronine ("T3").5 Marine natural products are rich sources of organoiodine compounds, like the recently discovered plakohypaphorines from the sponge Plakortis simplex.
The sum of iodomethane produced by the marine environment, microbial activitiy in rice paddies, and the burning of biological material is estimated to be 214 kilotonnes per year.6 The volatile iodomethane is broken up by oxidation reactions in the atmosphere and a global iodine cycle is established.
Organoiodine compounds are prepared by numerous routes, depending on the degree and regiochemistry of iodination sought and the nature of the precursors. The direct iodination with I2 is employed with unsaturated substrates:
- RHC=CH2 + I2 → RHIC-CIH2
The iodide anion is a good nucleophile and will displace chloride, tosylate, bromide and other leaving groups, as in the Finkelstein reaction. Aromatic iodides may be prepared via a diazonium salt in the Sandmeyer reaction.
- Alex G. Fallis, Pierre E. Tessier, "2-Iodoxybenzoic acid (IBX)1" Encyclopedia of Reagents for Organic Synthesis, 2003 John Wiley. doi:10.1002/047084289X.rn00221
- Blanksby SJ, Ellison GB (April 2003). "Bond dissociation energies of organic molecules". Acc. Chem. Res. 36 (4): 255–63. doi:10.1021/ar020230d. PMID 12693923.
- Phyllis A. Lyday (2005), "Iodine and Iodine Compounds", Ullmann's Encyclopedia of Industrial Chemistry, Weinheim: Wiley-VCH, doi:10.1002/14356007.a14_381
- Ulrich Speck, Ute Hübner-Steiner "Radiopaque Media" in Ullmann's Encyclopedia of Industrial Chemistry, Wiley-VCH, Weinheim, 2005. doi:10.1002/14356007.a22_593
- Gribble, G. W. (1996). "Naturally occurring organohalogen compounds - A comprehensive survey". Progress in the Chemistry of Organic Natural Products 68 (10): 1–423. doi:10.1021/np50088a001. PMID 8795309.
- N. Bell, L. Hsu, D. J. Jacob, M. G. Schultz, D. R. Blake, J. H. Butler, D. B. King, J. M. Lobert, and E. Maier-Reimer (2002). "Methyl iodide: Atmospheric budget and use as a tracer of marine convection in global models". Journal of Geophysical Research 107 (D17): 4340. Bibcode:2002JGRD..107.4340B. doi:10.1029/2001JD001151.
- F. B. Dains and R. Q. Brewster (1941), "Iodobenzene", Org. Synth.; Coll. Vol. 1: 323
|Core organic chemistry||Many uses in chemistry|
|Academic research, but no widespread use||Bond unknown|