|Name, symbol||ununseptium, Uus|
|Alternative names||element 117, eka-astatine|
|Ununseptium in the periodic table|
|Standard atomic weight (Ar)|||
|Element category||unknown, but probably a metalloid|
|Group, block||group 17, p-block|
|Electron configuration||Rn 5f14 6d10 7s2 7p5 (predicted)2|
|2, 8, 18, 32, 32, 18, 7 (predicted)|
|Melting point||573–773 K (300–500 °C, 572–932 °F) (predicted)2|
|Boiling point||823 K (550 °C, 1022 °F) (predicted)2|
|Density near r.t.||7.1–7.3 g/cm3 (extrapolated)3|
|Oxidation states||−1, +1, +3, +5 (predicted)12|
|Ionization energies||1st: 742.9 kJ/mol (prediction)2
2nd: 1785.0–1920.1 kJ/mol (extrapolated)3
|Atomic radius||empirical: 138 pm (predicted)3|
|Covalent radius||156–157 pm (extrapolated)3|
|CAS Registry Number||54101-14-3|
|Naming||IUPAC systematic element name|
|Discovery||Joint Institute for Nuclear Research and Lawrence Livermore National Laboratory (2010)|
|Most stable isotopes|
Ununseptium is a superheavy artificial chemical element with temporary symbol Uus and atomic number 117. The element, also known as eka-astatine or element 117, is the second-heaviest known element and second-to-last element of the 7th period of the periodic table. As of 2015[update], only fifteen atoms have been observed, six when it was first synthesized in 2010, seven in 2012, and two in 2014.
The discovery of ununseptium was first announced in Dubna, Russia, by a Russian–American collaboration in 2010, which makes it the most recently discovered element as of 2015[update]. One of its daughter isotopes was created directly in 2011, partially confirming the results of the experiment. The experiment itself was repeated successfully by the same collaboration in 2012 and by a joint German–American collaboration in 2014. The Joint Working Party (JWP) of the International Union of Pure and Applied Chemistry (IUPAC) and the International Union of Pure and Applied Physics, which is in charge of examining claims of discovery of superheavy elements, has made no comment on whether the element can be recognized as discovered. Once it is recognized, the discoverers will be empowered to give the element an official name. "Ununseptium" is a temporary systematic element name that is intended to be used before a permanent one is assigned; the moniker "element 117" is commonly used by researchers and in literature.
Ununseptium may be located in the "island of stability", a concept that explains why some superheavy elements are more stable than expected. The synthesized ununseptium atoms have lasted some tens and hundreds of microseconds. In the periodic table, ununseptium is expected to be a member of group 17, all other members of which are halogens.a Its properties are likely to be significantly different from those of the halogens; the key factor is the relativistic effects. Unlike the halogens, ununseptium is likely to neither commonly form anions nor achieve high oxidation states. However, a few key properties such as the melting and boiling points and the first ionization energy are expected to follow periodic trends.
In 2004, the Joint Institute for Nuclear Research (JINR) team in Dubna, Moscow Oblast, Russia, proposed a joint experiment with the Oak Ridge National Laboratory (ORNL) in Oak Ridge, Tennessee, United States, to synthesize element 117—so-called for the 117 protons in its nucleus—that required fusing a berkelium (element 97) target and a calcium (element 20) beam to be conducted by a joint Russian–American collaboration.5 However, the American team—the world's only producer of berkelium—could not then provide any, stating they had temporarily ceased production.5 Plans to synthesize element 117 were shelved temporarily in favor of the synthesis of element 118, which was produced by bombarding a californium target with calcium.6
The Russian team sought to use berkelium because calcium-48, the isotope of calcium used in the beam, has 20 protons and 28 neutrons; it is the lightest stable or near-stable nucleus with such a neutron excess. The second-lightest such nucleus, zinc-68, is much heavier. Since ununseptium has 117 protons in its nucleus and calcium has 20, they needed to use berkelium, which has 97 protons in its nucleus.7 The beam was made in Russia by chemically8 extracting the small quantities of calcium-48 present in Earth's natural calcium.9 Thanks to neutron excess, resulting nuclei became heavier and closer to the sought-after island of stability.b Sufficiently heavy nuclei have not been created as of 2015[update], however, and the synthesized isotopes tend to have fewer neutrons than those expected to be in the island of stability.11
In 2008, the American team resumed production of berkelium;5 they produced 22 milligrams of berkelium, enough to perform the experiment.13 The berkelium was subsequently cooled in 90 days and in another 90 days was chemically purified.14 The berkelium target had to be quickly transported to Russia because the half-life of berkelium-249, the produced isotope of berkelium, is only 330 days. After the given period, half of the targeted berkelium would have decayed. For the experiment to succeed, it had to begin within six months of its departure from the United States since too much of the berkelium would have decayed during the given period.14 In mid-2009, the target was packed into five lead containers to be sent on a commercial flight from New York to Moscow.14
Despite advanced preparation for the journey, Russian customs officials refused to let the target enter the country twice because of missing or incomplete paperwork. Over the span of a few days, the target traveled over the Atlantic Ocean five times.14 On its arrival in Russia, the berkelium was transferred to Dimitrovgrad, Ulyanovsk Oblast, where it was transformed into a 300 nm-thin layer deposited on a thin titanium film.15 It was then transported to Dubna, where it was installed in the JINR particle accelerator.13
The experiment began in June 2009. In January 2010, scientists at the Flerov Laboratory of Nuclear Reactions announced internally that they had detected the decay of a new element with atomic number 117 via two decay chains: one of an odd-odd isotope undergoing 6 alpha decays before spontaneous fission, and one an odd-even isotope undergoing 3 alpha decays before fission.16 On April 9, 2010, an official report was released in the journal Physical Review Letters identifying the isotopes as 294Uus and 293Uus, which were shown to have half-lives of order of tens or hundreds of microseconds. The isotopes were formed as follows:12c
97Bk + 48
20Ca → 297
117Uus* → 294
117Uus + 3 1
0n (1 event)
97Bk + 48
20Ca → 297
117Uus* → 293
117Uus + 4 1
0n (5 events)
All of ununseptium's daughter isotopes (decay products) were previously unknown;12 therefore, their properties could not be used to confirm the claim of discovery. In 2011, when one of the decay products (ununpentium-289) was synthesized directly, its properties matched those measured in the claimed indirect synthesis from the decay of ununseptium.17 The discoverers did not submit a claim for their findings in 2007–2011 when JWP was reviewing claims of discoveries of trans-copernicium elements (elements with atomic numbers greater than that of copernicium).18 The Dubna team successfully repeated the experiment in 2012, creating seven atoms of ununseptium. The results of the experiment matched the previous outcome;19 the scientists have since filed an application to register the element.20 In 2014, a joint German–American collaboration of scientists from the ORNL and the GSI Helmholtz Center for Heavy Ion Research in Darmstadt, Germany, claimed to have confirmed the element's discovery.2122 The team repeated the Dubna experiment using the Darmstadt accelerator, creating two atoms of ununseptium-294.22
As of 2015[update], no official name has been suggested for ununseptium. The discoverers will be given the right to suggest a name as soon as it is recognized by the JWP; a Dubna authority said in June 2012 that it "could take up to a year" before this happens.20 According to IUPAC's current guidelines, the names of new elements should end in "-ium"; this includes ununseptium, even if the element is a halogen, which traditionally have names ending in "-ine".23 Using Mendeleev's nomenclature for unnamed and undiscovered elements, ununseptium should be known as eka-astatine. Using the 1979 IUPAC recommendations, the element should be temporarily called "ununseptium" (symbol "Uus") until the discovery is confirmed and a permanent name chosen.24 Scientists frequently ignore these recommendations and call it "element 117", with the symbol "(117)" or "117".2
The stability of nuclei decreases greatly with the increase in atomic number after plutonium, the heaviest primordial element. All isotopes with an atomic number above 101 decay radioactively with half-lives of less than 30 hours. No elements with atomic numbers above 82 (after lead) have stable isotopes.25 Nevertheless, because of reasons not well understood yet, there is a slight increase of nuclear stability around atomic numbers 110–114, which leads to the appearance of what is known in nuclear physics as the "island of stability". This concept, proposed by University of California professor Glenn Seaborg, explains why superheavy elements last longer than predicted.26 Ununseptium is the second-heaviest element created so far; it is radioactive, having a half-life of less than one second; this is longer than the predicted value used in the discovery report.12 The Dubna team believes the synthesis of the element is direct experimental proof of the existence of the island of stability.27
It is calculated that the isotope 295Uus would have a half-life of (18 ± 7) milliseconds and that it may be possible to produce this ununseptium isotope using the same berkelium–calcium reaction used in the discoveries of the known isotopes, 293Uus and 294Uus, although the chance of this reaction producing 295Uus is estimated to be at most one-seventh the chance of producing 294Uus.282930 Calculations using a quantum tunneling model predict the existence of several isotopes of ununseptium with alpha decay half-lives up to 40 milliseconds, culminating at 296Uus (the research ends at 303Uus).31 A liquid drop model study on the element's isotopes shows similar results; it also reveals a general trend of increasing stability for isotopes heavier than 301Uus, with partial half-lives exceeding the age of the universe for the heaviest isotopes like 335Uus when beta decay is not considered.32
Ununseptium is expected to be a member of group 17 in the periodic table, below the five halogens; fluorine, chlorine, bromine, iodine, and astatine, each of which has seven valence electrons, forming a valence electron configuration of ns2np5.33d In the ununseptium's case, the trend will be continued and the valence electron configuration is predicted to be 7s27p5;2 ununseptium will behave similarly to the halogens in many respects. Significant differences are likely to arise; a large contributor to the effect is the spin–orbit (SO) interaction—the mutual interaction between the electrons' motion and spin. The SO interaction is especially strong for the superheavy elements because their electrons move faster—at velocities comparable to the speed of light—than those in lighter atoms.34 In ununseptium atoms, this lowers the 7s and the 7p electron energy levels, stabilizing the corresponding electrons, but two of the 7p electron energy levels are more stabilized than the other four.35 The stabilization of the 7s electrons is called the inert pair effect; the effect "tearing" the 7p subshell into the more-stabilized and the less-stabilized parts is called subshell splitting. Computational chemists understand the split as a change of the second (azimuthal) quantum number l from 1 to 1/2 and 3/2 for the more-stabilized and less-stabilized parts of the 7p subshell, respectively.36e For many theoretical purposes, the valence electron configuration may be represented to reflect the 7p subshell split as 7s2
Differences for other electron levels also exist. For example, the 6d electron levels (also split in two, with four being 6d3/2 and six being 6d5/2) are both raised, so they are close in energy to the 7s ones,35 although no 6d electron chemistry has been predicted for the element. The difference between the 7p1/2 and 7p3/2 levels is abnormally high; 9.8 eV.35 Astatine's 6p subshell split is only 3.8 eV,35 and its 6p1/2 chemistry has already been called "limited".37 These effects cause ununseptium's chemistry to differ from those of its upper neighbors (see below).
The first ionization energy—the energy required to remove an electron from an atom—is predicted to be 7.7 eV, lower than those of the halogens, again following the trend.2 Like its neighbors in the periodic table, ununseptium is expected to have the lowest electron affinity—energy released when an electron is added to the atom—in its group; 2.6 or 1.8 eV.2 The electron of the hydrogen-like ununseptium atom—oxidized so it has only one electron, Uus116+—is predicted to move so quickly that its mass is 1.9 times that of a non-moving electron, a feature coming from the relativistic effects. For comparison, the figure for hydrogen-like astatine is 1.27 and the figure for hydrogen-like iodine is 1.08.38 According to simple extrapolations of relativity laws, that indirectly indicates the contraction of the atomic radius.38 Advanced calculations show that the radius of an ununseptium atom that has formed one covalent bond would be 165 pm, while that of astatine would be 147 pm.39 With seven outermost electrons removed, ununseptium is finally smaller; 57 pm2 for ununseptium and 61 pm40 for astatine.
The melting and boiling points of ununseptium are not known. Earlier papers predicted them to be about 350–500 °C and 550 °C respectively,2 or 350–550 °C and 610 °C respectively.41 These values exceed the astatine (and all preceding) values, following periodic trends. A later paper, however, predicts ununseptium's boiling point to be 345 °C42 (that of astatine is estimated to be 309 °C,43 337 °C,44 or 370 °C,45 although experimental values of 230 °C46 and 411 °C40 have been reported). The density of ununseptium is expected to be between 7.1 and 7.3 g·cm−3, continuing the trend of increasing density from the halogens; that of astatine is estimated to be between 6.2 and 6.5 g·cm−3.3
Unlike the previous group 17 elements, ununseptium may not exhibit chemical behavior common for the halogens.4 For example, the extant members of the group commonly accept another electron to achieve a stable electronic configuration of a noble gas, having eight electrons (octet) in its valence shell, which is the minimum-energy configuration in which the outer electrons are tightly bound.47 This ability weakens as the atomic weight grows within the group 17 elements; ununseptium would be the least-willing group member to accept an electron—astatine already forms a positive oxidation state in its hydride. Of the oxidation states the element is predicted to form, −1 is predicted to be the least common.2
There is another opportunity for ununseptium to complete the octet—to form a covalent bond. Accordingly, like the halogens, when two ununseptium atoms meet, they are expected to form a Uus–Uus bond to give diatomic molecules. Such molecules are commonly bound via single sigma bonds that are located between the atoms; these are different from pi bonds, which are divided into two parts, each shifted in a direction perpendicular to the line between the atoms, opposite each other rather than being located directly between the atoms they bind. Sigma bonding has been calculated to show a great antibonding character in the At2 molecule and is not as favorable energetically. Ununseptium is predicted to continue the trend; a strong pi character should be seen in the bonding of Uus2.248 The molecule UusCl is predicted to go further, being bonded with a single pi bond.48
Aside from the unstable −1 state, three more oxidation states are predicted; +5, +3, and +1. The +1 state should be especially stable because of the destabilization of the three outermost 7p3/2 electrons, forming a stable, half-filled subshell configuration;2 astatine already shows similar effects.49 The +3 state should also be important because of the 7p3/2 electrons destabilization.41 The +5 state is predicted to be uncommon because the 7p1/2 electrons are oppositely stabilized.2 The +7 state has not been shown—even computationally—to be achievable by chemical reactions. Because the 7s electrons are greatly stabilized, it has been hypothesized that ununseptium has only five valence electrons.50
The simplest possible ununseptium compound is the monohydride, UusH. The bonding is provided by a 7p3/2 electron of ununseptium and the 1s electron of hydrogen. The non-bonding nature of the 7p1/2 spinor is because ununseptium is expected not to form purely sigma or pi bonds.51 Therefore, the destabilized (thus expanded) 7p3/2 spinor is responsible for bonding.52 This effect lengthens the UusH molecule by 17 picometers compared with the overall length of 195 pm.51 Since the ununseptium p electron bonds are two-thirds sigma, the bond is only two-thirds as strong as it would be if ununseptium featured no SO interactions.51 The molecule thus follows the trend for halogen hydrides, showing an increase in bond length and a decrease in dissociation energy in comparison with AtH.2 The molecules TlUus and UutUus may be viewed analogously, taking in account an opposite effect shown by the fact that the element's p1/2 electrons are stabilized. These two characteristics result in a relatively small dipole moment (product of difference between electric charges of atoms and displacement of the atoms) for TlUus; only 1.67 D,f the positive value implying that the negative charge is on the ununseptium atom. For UutUus, the strength of the effects caused a transfer of the electron from the ununseptium atom to the ununtrium atom, with the dipole moment value being −1.80 D.54 The SO interaction increases dissociation energy for the UusF molecule because it lowers the electronegativity of ununseptium, causing the bond with the extremely electronegative fluorine to have a more ionic character.51 Ununseptium monofluoride should feature the strongest bonding of all group 17 element monofluorides.51
The VSEPR theory predicts a bent-T-shaped molecular geometry for the group 17 trifluorides. All known halogen trifluorides have this molecular geometry and have a structure of AX3E2—a central atom, denoted A, surrounded by three ligands, X, and two unshared electron pairs, E. If relativistic effects are ignored, UusF3 should also follow its lighter congeners in having a bent-T-shaped molecular geometry. More sophisticated predictions show that this molecular geometry would not be energetically favored for UusF3, predicting instead a trigonal planar molecular geometry (AX3E0). This shows that VSEPR theory may not be consistent for the superheavy elements.50 This molecule is significantly stabilized by the SO interactions; a possible rationale may be the large difference in electronegativity between ununseptium and fluorine, giving the bond a partially ionic character.50
- The term "group 17" refers to a vertical column in the periodic table starting with fluorine and is distinct from "halogen", which refers exclusively to fluorine, chlorine, bromine, iodine, and astatine, all of which precede ununseptium in group 17. Unlike the other group 17 members, ununseptium may not be a halogen.4
- Although stable isotopes of the lightest elements usually have a neutron–proton ratio close or equal to one (for example, the only stable isotope of aluminium has 13 protons and 14 neutrons,7 making a neutron–proton ratio of 1.077), stable isotopes of heavier elements have higher neutron–proton ratios, increasing with the number of protons (iodine's only stable isotope has 53 protons and 74 neutrons, neutron–proton ratio of 1.396, gold's only stable isotope has 79 protons and 118 neutrons, neutron–proton ratio of 1.494, plutonium's most stable isotope has 94 protons and 150 neutrons, neutron–proton ratio of 1.596),7 and the trend is expected to continue to the superheavy elements,10 making it difficult to synthesize the most stable isotopes of these elements, because the neutron–proton ratios of the elements they are synthesized from are lower than the expected ratios of the most stable isotopes of the superheavy elements.
- A nuclide is commonly denoted by the chemical element's symbol immediately preceded by the mass number as a superscript and the atomic number as a subscript. Neutrons are represented as nuclides with atomic mass 1, atomic number 0, and symbol n. Outside the context of nuclear equations, the atomic number is sometimes omitted. An asterisk denotes an extremely short-lived (or even actually non-existent) intermediate stage of the reaction.
- The letter n stands for the number of the period (horizontal row in the periodic table) the element belongs to, the letters "s" and "p" denote the s and p atomic orbitals electrons follow (commonly called, correspondingly, s electrons and p electrons), and the superscript numbers denote the numbers of electrons following corresponding orbitals. That means, the valence shells of previous group 17 elements are composed of two s electrons and five p electrons, all located in the outermost electron orbital.
- The quantum number corresponds to the letter in the electron orbital name: 0 to s, 1 to p, 2 to d, etc. See azimuthal quantum number for more information.
- For comparison, the values for the ClF, HCl, SO, HF, and HI molecules are 0.89 D, 1.11 D, 1.55 D, 1.83 D, and 1.95 D, correspondingly. Compare to the values for molecules which do not form at standard conditions, GeSe, SnS, TlF, BaO, and NaCl, which are 1.65 D, ~3.2 D, 4.23 D, 7.95 D, and 9.00 D.53
- Fricke, Burkhard (1975). "Superheavy elements: a prediction of their chemical and physical properties". Recent Impact of Physics on Inorganic Chemistry 21: 89–144. doi:10.1007/BFb0116498. Retrieved 4 October 2013.
- Haire, Richard G. (2006). "Transactinides and the future elements". In Morss; Edelstein, Norman M.; Fuger, Jean. The Chemistry of the Actinide and Transactinide Elements (3rd ed.). Dordrecht, The Netherlands: Springer Science+Business Media. pp. 1724, 1728. ISBN 1-4020-3555-1.
- Bonchev, Danail; Kamenska, Verginia (1981). "Predicting the Properties of the 113–120 Transactinide Elements". Journal of Physical Chemistry (American Chemical Society) 85 (9): 1177–1186. doi:10.1021/j150609a021.
- GSI Helmholtz Centre for Heavy Ion Research. "Superheavy Element 117 Confirmed - On the Way to the "Island of Stability"". www.superheavies.de. Retrieved 2015-07-26.
- Gabage, Bill (2010). "International team discovers element 117". Oak Ridge National Laboratory. Retrieved 2015-07-28.
- Oganessian, Yuri Ts.; Utyonkov, Vladimir K.; Lobanov, Yuri V. et al. (2002). "Results from the first 249Cf+48Ca experiment" (PDF). JINR Communication.
- Audi, Georges; Bersillon, Olivier; Blachot, Jean et al. (2003). "The NUBASE evaluation of nuclear and decay properties" (PDF). Nuclear Physics A 729 (1): 3–128. Bibcode:2003NuPhA.729....3A. doi:10.1016/j.nuclphysa.2003.11.001.
- Jepson, B. E.; Shockey, G. C. (1984). "Calcium hydroxide isotope effect in calcium isotope enrichment by ion exchange". Separation Science and Technology 19 (2–3): 173–181. doi:10.1080/01496398408060653.
- "Ununseptium – The 117th element". Sputnik. 2009-10-28. Retrieved 2012-07-07.
- "Universal nuclide chart". Nucleonica. Institute for Transuranium Elements. 2007–2012. Retrieved 2012-07-03. (registration required)
- Oganessian, Yuri Ts.; Abdullin, F. Sh.; Bailey, P. D. et al. (2010-04-09). "Synthesis of a New Element with Atomic Number Z=117". Physical Review Letters (American Physical Society) 104 (142502). Bibcode:2010PhRvL.104n2502O. doi:10.1103/PhysRevLett.104.142502. PMID 20481935.
- Stark, Anne M. (2010). "International team discovers element 117". DOE/Lawrence Livermore National Laboratory. Retrieved 2012-11-29.
- Bardi, Jason Socrates (2010-04-08). "An Atom at the End of the Material World". Inside Science. Retrieved 2015-01-03.
- Joint Institute for Nuclear Research (2010). For the Press (Report). Retrieved 2015-07-28.
- Greiner, Walter (2010). "Recommendations: 31st meeting, PAC for nuclear physics" (PDF). PAC for Nuclear Physics. p. 6.
- В лабораториях ОИЯИ. Возвращение к дубнию [In JINR labs. Returning to dubnium] (in Russian). JINR. 2011. Retrieved 2011-11-09.
- Barber, Robert C.; Karol, Paul J.; Nakahara, Hiromichi et al. (2011). "Discovery of the elements with atomic numbers greater than or equal to 113 (IUPAC Technical Report)". Pure and Applied Chemistry 83 (7): 1485–1498. doi:10.1351/PAC-REP-10-05-01.
- Oganessian, Yuri Ts.; Abdullin, F. Sh.; Alexander, C. et al. (2013-05-30). "Experimental studies of the 249Bk + 48Ca reaction including decay properties and excitation function for isotopes of element 117, and discovery of the new isotope 277Mt". Physical Review C (American Physical Society) 87 (054621). Bibcode:2013PhRvC..87e4621O. doi:10.1103/PhysRevC.87.054621.
- "Russian scientists confirm 117th element". Sputnik. 2012-06-25. Retrieved 2012-07-05.
- Chow, Denise (2014-05-01). "New Super-Heavy Element 117 Confirmed by Scientists". LiveScience. Retrieved 2014-05-02.
- "48Ca+249Bk Fusion Reaction Leading to Element Z=117: Long-Lived α-Decaying 270Db and Discovery of 266Lr". Physical Review Letters 112 (172501). Journals.aps.org. 2014. Retrieved 2014-05-08.
- Koppenol, W. H. (2002). "Naming of new elements (IUPAC Recommendations 2002)" (PDF). Pure and Applied Chemistry 74 (5): 787–791. doi:10.1351/pac200274050787.
- Chatt, J. (1979). "Recommendations for the naming of elements of atomic numbers greater than 100". Pure and Applied Chemistry 51 (2): 381–384. doi:10.1351/pac197951020381.
- de Marcillac, Pierre; Coron, Noël; Dambier, Gérard et al. (2003). "Experimental detection of α-particles from the radioactive decay of natural bismuth". Nature 422 (6934): 876–878. Bibcode:2003Natur.422..876D. doi:10.1038/nature01541. PMID 12712201.
- Considine, Glenn D.; Kulik, Peter H. (2002). Van Nostrand's scientific encyclopedia (9th ed.). Wiley-Interscience. ISBN 978-0-471-33230-5. OCLC 223349096.
- "Element 117 is synthesized". JINR. 2010. Retrieved 2015-06-28.
- Zagrebaev, Valeriy; Karpov, Alexander; Greiner, Walter (2013). Future of superheavy element research: Which nuclei could be synthesized within the next few years? (PDF). Journal of Physics: Conference Series 420. IOP Science. pp. 1–15. arXiv:1207.5700. Retrieved 2013-08-20.
- Zhao-Qing, Feng; Gen-Ming, Jin; Ming-Hui, Huang et al. (2007). "Possible Way to Synthesize Superheavy Element Z = 117". Chinese Physics Letters 24 (9): 2551. arXiv:0708.0159. Bibcode:2007ChPhL..24.2551F. doi:10.1088/0256-307X/24/9/024.
- Zhao-Qing, Feng; Jina, Gen-Ming; Li, Jun-Qing et al. (2009). "Production of heavy and superheavy nuclei in massive fusion reactions". Nuclear Physics A 816: 33. arXiv:0803.1117. Bibcode:2009NuPhA.816...33F. doi:10.1016/j.nuclphysa.2008.11.003.
- Chowdhury, Roy P.; Samanta, C.; Basu, D. N. (2008). "Search for long lived heaviest nuclei beyond the valley of stability". Physical Reviews C 77 (4): 044603. arXiv:0802.3837. Bibcode:2008PhRvC..77d4603C. doi:10.1103/PhysRevC.77.044603.
- Duarte, S. B.; Tavares, O. A. P.; Gonçalves, M. et al. (September 2004). Half-life prediction for decay modes for superheavy nuclei (PDF) (Report). Notas de Física (CBPF-NF-022/04). Centro Brasileiro de Pesquisas Físicas. ISSN 0029-3865.
- Dhingra, Anand (1999-12-01). The Sterling Dictionary Of Chemistry. Sterling Publishers Pvt. Ltd. p. 187. ISBN 9788173591235. Retrieved 2015-07-23.
- Thayer 2010, pp. 63–64.
- Fægri Jr., Knut; Saue, Trond (2001). "Diatomic molecules between very heavy elements of group 13 and group 17: A study of relativistic effects on bonding". The Journal of Chemical Physics (American Institute of Physics) 115 (6): 2456. Bibcode:2001JChPh.115.2456F. doi:10.1063/1.1385366.
- Thayer 2010, pp. 63–67.
- Thayer 2010, p. 79.
- Thayer 2010, p. 64.
- Pyykkö, Pekka; Atsumi, Michiko (2008-12-22). "Molecular Single-Bond Covalent Radii for Elements 1-118". Chemistry - A European Journal 15: 186–197. doi:10.1002/chem.200800987.
- Sharma, B. K. (2001). Nuclear and radiation chemistry (7th ed.). Krishna Prakashan Media. p. 147. ISBN 978-81-85842-63-9. Retrieved 2012-11-09.
- Seaborg, G. T. (1994). Modern alchemy. World Scientific. p. 172. ISBN 981-02-1440-5.
- Takahashi, N. (2002). "Boiling points of the superheavy elements 117 and 118". Journal of Radioanalytical and Nuclear Chemistry 251 (2): 299–301. doi:10.1023/A:1014880730282.
- Luig, Heribert; Keller, Comelius; Wolf, Walter et al. (2005). "Radionuclides". In Ullmann, Franz. Encyclopedia of industrial chemistry. Wiley-VCH. p. 23. doi:10.1002/14356007.a22_499. ISBN 978-3-527-30673-2.
- Punter, Jacqui; Johnson, Robert; Langfield, Steve (2006). The essentials of GCSE OCR Additional science for specification B. Letts and Lonsdale. p. 36. ISBN 978-1-905129-73-7.
- Wiberg, Egon; Wiberg, Nils; Holleman, Arnold Frederick (2001). Inorganic chemistry. Academic Press. p. 423. ISBN 978-0-12-352651-9.
- Otozai, K.; Takahashi, N. (1982). "Estimation chemical form boiling point elementary astatine by radio gas chromatography". Radiochimica Acta 31 (3‒4): 201‒203.
- Bader, Richard F. W. "An introduction to the electronic structure of atoms and molecules". McMaster University. Retrieved 2008-01-18.
- Pershina 2010, p. 504.
- Thayer 2010, p. 84.
- Bae, Cheolbeom; Han, Young-Kyu; Lee, Yoon Sup (2003-01-18). "Spin−Orbit and Relativistic Effects on Structures and Stabilities of Group 17 Fluorides EF3 (E = I, At, and Element 117): Relativity Induced Stability for the D3h Structure of (117)F3". The Journal of Physical Chemistry A 107 (6): 852–858. doi:10.1021/jp026531m.
- Han, Young-Kyu; Bae, Cheolbeom; Son, Sang-Kil et al. (2000). "Spin-orbit effects on the transactinide p-block element monohydrides MH (M=element 113-118)". Journal of Chemical Physics 112 (6): 2684–2691. Bibcode:2000JChPh.112.2684H. doi:10.1063/1.480842.
- Stysziński 2010, pp. 144–146.
- Lide, David R. (2003). "Section 9, Molecular Structure and Spectroscopy". CRC Handbook of Chemistry and Physics (84th ed.). Boca Raton, Florida: CRC Press. pp. 9–45, 9–46. ISBN 9780849304842.
- Stysziński 2010, pp. 139–146.
- Barysz, M.; Ishikawa, Y., eds. (2010). Relativisic methods for chemists. Springer Science+Business Media. ISBN 978-1-4020-9974-8.
- Thayer, John S. (2010). Relativistic Effects and the Chemistry of the Heavier Main Group Elements. p. 63. doi:10.1007/978-1-4020-9975-5_2. ISBN 978-1-4020-9974-8.
- Stysziński, Jacek (2010). Why do we need relativistic computational methods?. doi:10.1007/9781402099755_3.
- Pershina, V. (2010). Electronic structure and chemistry of the heaviest elements. doi:10.1007/9781402099755_11.
- Ununseptium at The Periodic Table of Videos (University of Nottingham)
- Flerov Lab press release announcing synthesis
|Periodic table (Large cells)|